group_1_1.jpg

Fire Suppression – FSS-021D

“Vighnaharta A3S” brings to you Fire Suppression Panels with unique features. They are NFPA & EN54-2 compliant and posses all the features required by international users. Panels are EMI/EMC tested and are protected against power line surges. Fault tolerant, intelligent, triple logic electronic hardware circuit coupled with intelligent software removes probability of accidental release.

group_1_1.jpg

Fire Suppression – FSS 042D

“Vighnaharta A3S” brings to you Fire Suppression Panels with unique features. They are NFPA & EN54-2 compliant and posses all the features required by international users. Panels are EMI/EMC tested and are protected against power line surges. Fault tolerant, intelli-gent, triple logic electronic hardware circuit coupled with intelligent software removes probability of accidental release.

group_1_1.jpg

Conventional/Addressable Gas Panel – AGDS -32

AGDS-32 can handle gas monitoring applications up to 32 addressable gas detectors and signal output devices. It is specifically designed for industries such as gas plants, storage facilities and terminals, refineries, natural gas processing, gas pipelines, pumps and compressor stations where the gas may leak.

group_1_1.jpg

Industrial Gas Detector – TS 12 ILR – PPM

TS12ILR gas detector is suitable for gas detection in Refineries, Chemical plant, LPG station, Gas Boiler, and Spray- Paints etc where gas leakage is possible. It reads the gas concentration in Air and transmits to a detection panel over digital bus. This detector, adopting catalytic gas sensor, has advantages of good reproducibility, good performance against changes in temperature and humidity.

group_1_1.jpg

Residential Gas Leak Detector – TS230/12 HLRBV

Safety of commercial & industrial kitchens is of prime importance. TS12CLR Commercial Grade Gas Leak Detectors can detect LPG or PNG and warn before the gas density in air reaches unwanted levels.

group_1_1.jpg

CCS-T Climate Control System – Touch Screen

CCS-T system is used to control Heat recovery ventilation system, also known as HRV OR Mechanical ventilation heat recovery, or MVHR. It is an energy recovery ventilation system using equipment known as a heat recovery ventilator, heat exchanger, air exchanger, or air-to-air heat exchanger which employs a cross flow or counter-flow heat exchanger (counter current heat exchange) between the inbound and outbound air flow.HRV provides fresh air and improved climate control, while also saving energy by reducing
heating (and cooling) requirements for many applications including Green Buildings.